Re: CUCM 6.1 to 7.1 lab setup change mac address on server
So you want to know how to bypass Cisco's entire licensing program? I doubt you will get an explanation of how to do that.
UCM is designed to give you sufficient licenses in demo mode to perform lab-type use out of the box. If you perform an installation and do not upload a single license file, you will get a small pool of node licenses and DLUs.
If you are doing a DRS restore to test this, you will need to delete the license files from the CLI and restart the machine. There is a bug surrounding FlexLM properly modifying Informix when deleting license files so you may have mixed results with returning to demo mode.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...