I have come across an issue and wanted to see if anyone else has seen the following:
Configuration - CUCM 6.1 cluster with ICT to CCM 4.13 cluster. Also, have GK H.225 trunks configured to a GK cluster.
The problem is that when I make any change on either the Inbound Calls for the ICT or H225 trunk configuration (signficant digits/inbound CSS), the change is reflected across both trunk types. The actual configuration items do not update (CSS will be different on both trunk types), but their behavior changes to the last configuration change regardless of which trunk is being configured.
I have also seen this issue with the CCM 4.13 cluster.
I would hope that the two trunk types can have seperate configurations.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...