I have a requirement from one customer. Basically, I have to upgrade the exsiting CUCM 6 to CUCM 8.6 and also to add new user license. The existing CUCM has arround 400 users, and I need to upgrade the License to 1000. I'm trying to prepare a quote using UCSS, please check below BOQ and tell me If I'm missing something:
CUCM-USR-LIC Top Level Sku For User License 1
MIG-CUCM-USR-A Migration to UC Manager Enhanced - Less than 1K Users 300
UCSS-UCM-1-1-A UC Manager Enh UCSS Less than 1K users - 1 user - 1 year 300
MIG-CUCM-BASIC-A Migration to UC Manager Basic - Less than 1K Users 300
UCSS-UCM-BAS-1-1-A UC Manager Basic UCSS Less than 1K users - 1 user - 1 year 300
UCM-7835-85 CUCM 8.5 7835 3
CCX-85-CMBUNDLE-K9 CCX 8.5 5 Seat CCX ENH CM Bundle - AVAILABLE ONLY FOR NEW CM 1
CUCM-PAK Include PAK Auto-expanding PAK for CUCM 1
CUCM-USR Include PAK Auto-expanding User for CUCM 1200
UCM-7835-85-UKIT CUCM 8.5 Upgrade Media Kit 1
UCM-7835-UPG-NODE CUCM 7835 Upgrade Node 3
UCSS-UCM-BASIC-PAK Include PAK Auto-expanding User for CUCM 8.0 1
UCSS-UCM-PAK Include PAK Auto-expanding UCSS PAK for CUCM 1
What I want to know, do I require other part # for the new user license or it's ok I can use the MIG-CUCM-USR-A to upgrade and add more license??
You probably need to read through the ordering guide once more. The MIG-CUCM-USR SKUs are meant to upgrade a customer who does not have UCSS entitlement. It seems unlikely that a customer on CUCM6 would have already allowed their UCSS contract to lapse. If they still have UCSS you only need to place a PUT order for them and then add CUCM-USR SKUs for the additional users they are adding. Also be careful to pay attention to users vs. public space devices.
Your Partner Account Manager or supporting Customer SE can help you more interactively than this forum allows.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...