Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 7.0(2) and Unity Connection 7 doubt

Hi to all,

I am testing in my lab this two servers and today I have gotten the voice ports in the CUCM 7.0(2) rejected.

Why this can be?

Best regards,

Hall of Fame Super Red

Re: CUCM 7.0(2) and Unity Connection 7 doubt

Hi Alberto,

We ran into this exact problem in the lab when first building UC. This was our problem (naming convention). Once the prefix names matched up everything came to life right away!

On the Cisco Voice Mail Server page, the name of the voice mail server appears. We recommend that you accept the default name for the voice mail server. If you must use a different name, however, the name must have no more than nine characters.

The voice mail server name must match the Device Name Prefix field in Cisco Unity Connection on the Port Group Basics page for the voice messaging ports.

Device Name Prefix

***Enter the prefix that Cisco Unified CM adds to the device name for voice ports. This prefix must match the prefix used by Cisco Unified CM.

For example the prefix might be UVM1- XXXX this must match in both CCM and UC.

Hope this helps!