Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUCM 7.1 3b on IBM X 3650 M2

HI all,

Iam trying to install CUCM 7.1 3b on a customer provided IBM x 3650-M2 Xeon 4C E5540 80W 2.53GHz/1066MHz FSB/8MB L3, 2x4GB with 4 *146 GB hardisk.when i insert the CUCM 7.1 system installation DVD it throws an error as "expecting 4 hardisks but 0 found" and "Expecting 2 CPU but one found".

Could any one tell me as how to install CUCM on this Server?

I have verified the CUCM support for this hardware and it shows positive.

Thanks

3 REPLIES

Re: CUCM 7.1 3b on IBM X 3650 M2

Have you build the RAID array and such with the manufacturer provided DVD/CD's for drivers, RAID, etc?  If not, that's the first place to start.  When you buy OEM from Cisco, the servers are pre-built to platform install.  When you buy from the manufacturer they are typically empty images and need to be imaged to a point where hardware validation will work.

Hailey

Please rate helpful posts.

Community Member

Re: CUCM 7.1 3b on IBM X 3650 M2

Please see my post here:

https://supportforums.cisco.com/message/3031804

I'm having a very similar issue building Unity Connection 7.X on IBM servers.

Good Luck,

Amir

Re: CUCM 7.1 3b on IBM X 3650 M2

Hari,

See my last post here.  https://supportforums.cisco.com/message/3031826#3031826

Please rate helpful posts!

Hailey

988
Views
0
Helpful
3
Replies
CreatePlease to create content