A cluster with five CUCM servers do backup to a windows server using freeftpd. Then, after adding CIUS support using a device packcage backup fails from some of the cluster servers, but others work.
I have readed and seems there are a more than 1Gb file issue on freeftp, but I see that servers that do the backup properly in the cluster leave in the sftp file larger than this size. Also I have tried with coreFTPd with the same result.
Any idea? Any recommended free SFTP server for Windows to test?
What are the supported SFTP Servers to perform backup and restore?
Make sure that Cisco Unified Communications Manager is running. In a cluster, make sure that Cisco Unified Communications Manager is running on all servers in the cluster. To back up data to a remote device on the network, you must have an SFTP server configured. The following SFTP servers are supported and recommended, but you may use any SFTP server:
•In addition to the free sftp servers mentioned below, GlobalScape is the commercial SFTP Server that have been certified with Cisco through the Cisco Technology Developer Partner program (CTDP). More info refer to http://www.globalscape.com/gsftps/cisco.aspx.\\
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.