Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM 7.1 SIP trunk to Nortel Option #81 & Call Pilot

Customer has a Nortel Option #81 running release 5.1.5 {I haven't confirmed if they have it licenced for QSIG} however, if I have CUCM 7.1.3 do you know if I can use a SIP trunk between and have a Cisco IP set use the Call Pilot vocie mail and have MWI as well as CLID. I would guess that QSIG on the Nortel PBX is a must, however wondering if anyone has tried this before and or seen an interoperability guide that covers this?

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CUCM 7.1 SIP trunk to Nortel Option #81 & Call Pilot

Hi Douglas,

This doc looks pretty promising

Nortel CS1000E Release 5.0 Using SIP to Cisco Unified
Communications Manager Release 7.0

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/717317.pdf

Cheers!

Rob

3 REPLIES
Hall of Fame Super Red

Re: CUCM 7.1 SIP trunk to Nortel Option #81 & Call Pilot

Hi Douglas,

This doc looks pretty promising

Nortel CS1000E Release 5.0 Using SIP to Cisco Unified
Communications Manager Release 7.0

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/717317.pdf

Cheers!

Rob

New Member

Re: CUCM 7.1 SIP trunk to Nortel Option #81 & Call Pilot

Rob, I had a quick read and this is what I am looking for. Thank you very much!

Hall of Fame Super Red

Re: CUCM 7.1 SIP trunk to Nortel Option #81 & Call Pilot

Hi Douglas,

You are most welcome! Have a great weekend.

Cheers!

Rob

642
Views
0
Helpful
3
Replies