Is there a way for a callers name to be displayed when ringing in.
In other words I want the number to ring a hunt group which will call 3 or more phones. I would like it to display the name of the caller so that it can be recognised and asnwered in the appropriate manner.
I know we are not having caller id service from the providor, I was hoping there was something on CUCM that I could configure
if you are getting an icoming call from the PSTN, there is nothing for you to configure, the name on the caller id is named Information Elements, and is set by the TELCO, some of them have this option some other do not
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...