Hi, we've a cluster of CUCM 7.1.3 and customer wants to generate only 1 CDR file per day. We set the CDR File Time Interval to 1440 and now only 1 report per day is generated. THe problem is that this file is generated at 6PM instead of midnight (to have all calls of day in a single file). We wasn't able to find where to set the time when CDR file is generated; any suggestions?
Reports with report generation interval of Daily in the Automatic Generation/Alert Option and enabled automatically generate every day at the time that you specify and get deleted after the number of days that you specify.
Changes take effect at midnight. You can force the change to take effect immediately by stopping and restarting the CAR Scheduler service.
I'll add some other infos to let you better understand the scenario: this report should be sent to an external billing server, so we configured CUCM to have an access this external billing server via SFTP: this configuration is working fine. We made no configuration for the CAR.
The problem is that this file is generated at 6PM instead of midnight, looking at the call detail in the file; we want that file is generated at midnight in order to have all calls of the day in a single file.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...