Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cucm 7: route incoming fax-calls from pstn to bri interface

hi @ all,

i changed our communication system from ccme to ccm 7.2. now, the ccme is running as mgcp-gateway. there are 4 bri interfaces installed in the ccme. the first 3 bri are connected to the pstn. the fourth bri ist directly connected fo a isdn fax server through a crossover-cable. the fourth bri is configured as network. what setting must i take at the ccm or ccme to route the fax-calls that come in at the 3 pstn-bri´s to route out to the fourth fax-bri? maybe it is possible to route the fax-calls direct in the gateway without sending to ccm.

*** ccme config ***

178
Views
0
Helpful
0
Replies