Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CUCM 8.0 and User Connection License

In CUCM 8.0 UCL   we dont need device lic and Appliance license, JUST UCL is enough, please light me with more detail about UCL license method.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: CUCM 8.0 and User Connection License

Yes UCL eliminates device and node licenses; however, UCM 8.0 is not UCL-aware yet. You will still need the same feature, node, and device licenses you did previously.

Please remember to rate helpful responses and identify helpful or
6 REPLIES
VIP Super Bronze

Re: CUCM 8.0 and User Connection License

This has been documented in the ordering guide (partners only): Ordering Guide for Cisco  IP Communications, UCL-based

Please remember to rate helpful responses and identify helpful or

Re: CUCM 8.0 and User Connection License

Yes I have download the documnet, Do UCL is replacment of device lic and appliance lic ? since CUCM 8.0 I am not able to see any appliance lic, Please light me with more detail of UCL

VIP Super Bronze

Re: CUCM 8.0 and User Connection License

Yes UCL eliminates device and node licenses; however, UCM 8.0 is not UCL-aware yet. You will still need the same feature, node, and device licenses you did previously.

Please remember to rate helpful responses and identify helpful or

Re: CUCM 8.0 and User Connection License

Hmmm...but for CUCM 8.0;  I am not able to find NODE LIC file itself , I am bit confuse with CUCM 8.0 lic calculation, from CUCM 8.0 I hope it is UCL –Aware.

CUCM 8.0  design for 600 users as follows, please confirm this design is ok or it is better go with CUCM 7.1 itself and then upgrade to 8.0

MCS7825I4-K9-CMD1MCS7825I4-K9-CMD1Unified CM 8.0   7825-I4 Appliance
CCX-80-CM-BUNDLECCX-80-CM-BUNDLECCX   8.0 5 Seat CCX ENH CCM Bundle - AVAILABLE ONLY WITH CM
CUCMS-EVAL-K9CUCMS-EVAL-K9CUCMS   Monitoring Bundle Evaluation
CAB-ACUCAB-ACUAC   Power Cord (UK), C13, BS 1363, 2.5m
CON-ESW-CCX80CMCON-ESW-CCX80CMESSENTIAL   SW CCX 8.0 5 Seat CCX Bundle
CON-SNT-MCS782CMCON-SNT-MCS782CMSMARTNET   8X5XNBD Unified CM 8.0 7825-I4 Appliance

UCL LIC:

CUCM-USR-LICCUCM-USR-LICTop Level Sku   For User License0.00
CUCM-PAKCUCM-PAKInclude   PAK Auto-expanding PAK for CUCMIncluded
CUCM-USRCUCM-USRInclude   PAK Auto-expanding User for CUCMIncluded
LIC-CUCM-USR-ALIC-CUCM-USR-AUnified   Communications Manager Enhanced Single User-Under 1KIncluded
UCM-7825-80-KITUCM-7825-80-KITCUCM   8.0 Media KitIncluded
CON-ESW-CUCMUSRCON-ESW-CUCMUSRESSENTIAL   SW Top Level Sku For User License0.00
CON-ESW-EUSRA1CON-ESW-EUSRA1ESSENTIAL   SW Unified Comm Mgr Enh Sngle User Under 1K10.00 X 600 Users
LIC-CUCM-USRLIC-CUCM-USRLicense   - 1 Enhanced User210.00 X 600 Users
UCM-7825-80UCM-7825-80CUCM   8.0 78250.00
VIP Super Bronze

Re: CUCM 8.0 and User Connection License

While UCL (or UWL) is required in 8.0 ordering, the software itself is not yet aware of that. When you place a UCL order Cisco will generate the appropriate DLU, node, and feature LIC files for you still. We expect UCL/UWL-awareness around version 9.0, hopefully.

Please remember to rate helpful responses and identify helpful or
New Member

CUCM 8.0 and User Connection License

So for 2042 Enhanced users how many DLUs could I expect?

30159
Views
0
Helpful
6
Replies