Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 support?

Hi all.

My name is Jcob Shin.

I`m Korean.

So I can`t speak English.

But I have question and I want to know this information.

Now my customer use the CUCM 8.5.1 with vmware ESXi5 on UCS C250 M2.

Unfortunately it was happen problem. T.T

Problem is Vmware host error.

Error message is I/O latency timeout.

But I have doubts C250 M2.

Because I tried to search the CUCM 8.5.1 with C250 support text but I could not it.

Maybe if you know it then reply to me.

Thank very much for read my poor English text.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 support?

Have you already reviewed the virtualization wiki??

Unified Communications in a Virtualized Environment

http://docwiki.cisco.com/wiki/Unified_Communications_in_a_Virtualized_Environment

That server doesn't show in the

Tested Reference Configurations (TRC)

http://docwiki.cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES
Cisco Employee

CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 support?

Have you already reviewed the virtualization wiki??

Unified Communications in a Virtualized Environment

http://docwiki.cisco.com/wiki/Unified_Communications_in_a_Virtualized_Environment

That server doesn't show in the

Tested Reference Configurations (TRC)

http://docwiki.cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 support?

Thanks Java.

Re: CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 support?

Check thet LRO is disabled in VMWare, if I don't remember wrong these are some or the errors you can get if you don't disable LRO.

http://docwiki.cisco.com/wiki/Disable_LRO

Even though the C250 M2 isn't "Tested Reference Configurations" it should be OK for "Specs-Based VMware Hardware Support"

Br.

Maciej

New Member

CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 support?

Thanks for Maciej.

Yes. UCS C250 M2 is not TRC.

It`s specs-based server.

I could not found compatibility of CUCM 8.5.1 with C250 M2.

But CUCM 8.5.1 with VMware ESXi 5 compatibility found.

Now It opened case.

If it will clear then I will reply that.

Thank you so much.

2106
Views
0
Helpful
4
Replies