Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM 8.5 CUBE call drop

Hi All

i ahve CUCM 8.5 i am integrating SIP ISP through cisco CUBE , when i made the call H323-->CUBE-->SIP ISP call worked fine but i have to use fast start for inbound and outbound with MTP.

when i tried to go with  SIP trunk from CUCM to CUBE i am facing wiered situation that call completed for 6 seconds then dropped from CUCM.

i tried all possible scenario (early offer without MTP, with MTP,midcall,...etc) and same result.

in RTMT when i run the realtime monitring for CCM service i got the following error(MTPJRO is MTP Resource):

11:51:32.314 |//SIP/SIPCdpc(1,68,173)/ci=16802005/ccbId=291/scbId=0/addTransparencyInfo: Transparency info is NULL.  Not attaching anything.|1,100,50,1.294033^10.0.30.1^MTPJRO

11:51:33.165 |SDPMsg getVideoMLine - Warning video line (size=0,idx=0) not found, returning System Default |*^*^*

11:51:33.165 |SDPMsg getVideoMLine - Warning video line (size=0,idx=0) not found, returning System Default |*^*^*

11:51:33.165 |SDPMsg getVideoMLine - Warning video line (size=0,idx=0) not found, returning System Default |*^*^*

11:51:33.166 |SDPMsg getVideoMLine - Warning video line (size=0,idx=0) not found, returning System Default |*^*^*

11:51:33.196 |//SIP/SIPCdpc(1,68,173)/ci=16802005/ccbId=291/scbId=0/getXCiscoViPRFallbackIDAndDTMFKey: Device type 8, Pstn Fallback is not enabled|1,100,57,1.2113^10.0.30.1^*

11:51:38.173 |ViprUtils: Number has no +, not a valid E164 [9902]|1,100,62,116.1^*^*

11:51:38.173 |//SIP/SIPCdpc(1,68,173)/ci=0/ccbId=291/scbId=0/uploadVCRifRequired: VcrUploadNeeded 1|1,100,62,116.1^*^*

11:51:38.173 |MediaManager(192)::wait_AuDisconnectRequest, mCleanupPreallocatedMTP=0|1,100,62,116.1^*^*

11:51:38.174 |MatrixControl:updatePartyMediaCoordinatorNodeId: party1 videoCapable=0, party 2 videocapable=0|1,100,62,116.1^*^*

11:51:41.243 |LineControl TEST DEBUGS: Number of entries in CallTable is =  1

|1,100,50,1.294041^10.0.21.21^SEP00262200FDE2

based on above how can we adjust the transparency setting other than developing script using SIP normallization.

985
Views
0
Helpful
0
Replies