Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

CUCM 8.5 integration with LDAP Server 2008 R2

Hi all,

I am trying to integrate CUCM 8.5 with Windows Server 2008 R2 LDAP using the anonymous user. Can you confirm if it is possible in Server 2008 R2 or not. If its possible then please guide how i can integrate with server and what exactly i need configure for server and CUCM.

Thanks

4 REPLIES
VIP Super Bronze

CUCM 8.5 integration with LDAP Server 2008 R2

Anonymous binds was disabled by Microsoft at some point for security purposes. You could possibly work with a Microsoft engineer to undo this. I suggest you just create an account and have CUCM bind with that instead.

Super Bronze

CUCM 8.5 integration with LDAP Server 2008 R2

Hi

I don't believe 2k8 accepts anonymous binds without some configuration to permit it.

You would be best advised to set up a service account for the AD integration; this doesn't need any extra permissions, it can be just a standard Domain User.

Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

CUCM 8.5 integration with LDAP Server 2008 R2

we need anonymous user feature because of some reasons. Can you guide how to enable anonymous user feature in 2k8.

VIP Super Bronze

CUCM 8.5 integration with LDAP Server 2008 R2

I cannot and suggest that you reach out to an appropriate Microsoft resource/forum or Google.

428
Views
0
Helpful
4
Replies
CreatePlease to create content