Well, it all comes down to your requirements, user/phone count is not all that is important when selecting solution, you need to look at features required, deployment model, ie. remote sites support, redundancy requirements, application integration, i.e. Voicemail, administration, etc, etc.
Obviously Cisco has several voice solutions ranging from UC3XX, UC5XX, CME, Business Edition, up to full CUCM.
If you can provide more details around your requirments perhaps we can assist with guidance.
Chris, if CUCM is LDAP'd to AD, End Users can login into CCMuser page. Can I use Application User (create new) associate a device for control and have it work? I was just trying this approach to give non-ldap user phone control and ccmuser login to change their phone settings, but no go. I can associate the device, but when I login into ccmuser page, the device is not showing up to control (call foward, etc)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...