Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM 8.5 Upgrade to 8.6 Revisited

All,

I asked about this a few days ago but am still struggling with a few things. 

1) COP file.  Is this uploaded to the PUB the same way the software update is?

2) I know I upgrade the PUB then boot to the new partition but are the subs upgraded also or wiped clean?  If the Subs are upgrade the pub is done first right?

Feel free to point me in the right direction.  I have been looking for a doc that gives all the steps for the upgrade from 8.5 to 8.6 but the links I am finding keep pointing me back to each other.

Thanks in advance.  all replies rated.

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

CUCM 8.5 Upgrade to 8.6 Revisited

1) Yes, there is no other way to install anything on Linux appliances. Either via OS Admin or CLI and procedure is pretty much the same for anything (COP, locales, upgrades, etc)

Have you already reviewed the RNs for 8.6 which cover the upgrade?

Software  Upgrade Procedures

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862a.html#wp2058252

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES
Cisco Employee

CUCM 8.5 Upgrade to 8.6 Revisited

1) Yes, there is no other way to install anything on Linux appliances. Either via OS Admin or CLI and procedure is pretty much the same for anything (COP, locales, upgrades, etc)

Have you already reviewed the RNs for 8.6 which cover the upgrade?

Software  Upgrade Procedures

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862a.html#wp2058252

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CUCM 8.5 Upgrade to 8.6 Revisited

Thanks.  I just found the same link about 5 minutes after posting.

No reboot needed after the COP file install right?

New Member

CUCM 8.5 Upgrade to 8.6 Revisited

We did not re-boot after the COP file. I documented our upgrade (we did CER and CUCM at the same time). It was tailored more for some jr engineers in our company, so pardon any obvious steps.

https://dl-web.dropbox.com/get/Josh/CUCM_CER_UpgradeTo_8_6_SANITIZED.docx?w=9cdf0f5d

*DISCLAIMER - I am not a Cisco employee and this is not meant to be a cisco upgrade guide. This is for reference only, use at your own risk

3579
Views
0
Helpful
3
Replies