Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM 8.6.2 - Doubt about Call Restriction

Hi Guys,

I have the following scenario below:

                                        Example

Site A                                                                      Site B
Pilot 5005
DN about Pilot

                                                                    DN 6000, 6001, 6002,.....

5760
5761                                                                        Site C
5762

5763
5764                                                           DN 7000, 7001, 7002, ...
5765
5766
5767                                                                        Site D
5768
5769                                                            DN 8000, 8001, 8002,

The user site B, C and D call for DN about Agent site A directly or via Pilot. The Customer would like know if is possible A (origin)  call for (destination) B, C or D and appear for B, C or D only pilot number (5005 - without appear the DN about Agent that start the call)

                  

Thanks,


Wilson

  • IP Telephony
2 ACCEPTED SOLUTIONS

Accepted Solutions

CUCM 8.6.2 - Doubt about Call Restriction

I would try changing the Connected Party Transformations on the hunt pilot to Restricted and see if that helps your scenario. 

Please rate useful posts.

Please rate useful posts.
New Member

CUCM 8.6.2 - Doubt about Call Restriction

Calling Party Transormation Pattern would be the right way to do it.

Kind regards,
Andrew C.

Kind regards, Andrew C.
3 REPLIES

CUCM 8.6.2 - Doubt about Call Restriction

I would try changing the Connected Party Transformations on the hunt pilot to Restricted and see if that helps your scenario. 

Please rate useful posts.

Please rate useful posts.
New Member

CUCM 8.6.2 - Doubt about Call Restriction

Calling Party Transormation Pattern would be the right way to do it.

Kind regards,
Andrew C.

Kind regards, Andrew C.
New Member

CUCM 8.6.2 - Doubt about Call Restriction

Hi George and Andrew,

I am sorry, but, I putted the wrong information. In the really, for this group, there is not Hunt Pilot configured, there are Call Pick Group configured. Is possible with Call pickup group to do this configuration?

Thanks,

Wilson

150
Views
0
Helpful
3
Replies
This widget could not be displayed.