however, after following the doc, the service desk user cannot log in to the ccmadmin webpage. every time login info is entered, the authentication page simply resets. no error (e.g. invalid password, etc) is provided.
does anyone know how to fix this issue? i've added screenshots to show exactly what i have done.
1. create a custom user role that has read/update privileges to user web pages
2. Create a custom user group that includes the custom role, as well as the Standard CCM Admin Users role.
3. Apply user group to user.
please note that even though the service desk administrator will only be able to get to the end user configuration page with this setup, he'd still be able to change his own user group (to SuperUser, for instance) since the configuration is done on the same webpage.
the best solution that i have been able to find is to limit users who can assign administrative privileges to superusers. you obviously need to make sure that only the authorised administrators are assigned to the superuser group.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...