CUCM 8.6.2a on UCS C200 M2 - UPS graceful shutdown
We have a CUCM 8.6.2a running on a UCS C200 M2. We recently connected a UPS to the UCS blade and I have read in the CUCM release notes that there is a feature that will gracefully shutdown the CUCM when low power is reached. But, I'm wondering how you activate it? The document only mentions about connecting a USB but since this is a virtual server should I make some configuration change to the ESXi?
Here is the link I'm refering to: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862a.html#pgfId-2041345
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...