02-09-2012 08:19 AM - edited 03-16-2019 09:30 AM
Hi all, if I have a device with 3 DN all with busy trigger = 1 how can I setup my phone to receive only 1 calls over the three lines/DN?
On CME I have the hunt stop channel on the device but I can't find any equal feature on my CUCM 8.6.
Thanks.
Enrico
Solved! Go to Solution.
02-09-2012 11:09 AM
You can't each DN is a separate line and can receive up to X calls EACH depending on the busy trigger.
That phone can have 3 calls at any given time with your config.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
02-09-2012 11:09 AM
You can't each DN is a separate line and can receive up to X calls EACH depending on the busy trigger.
That phone can have 3 calls at any given time with your config.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide