CUCM 8.6 SIP Trunk - Early Offer Codec Negotiation
You want to know if CUCM is using 30ms packetization. I am not sure if that trace is tellign you its using 20ms packetization. But if you enable "debug ccsip messages" on your CUBE., the "a=ptime" attribute in your SDP will tell you what packetization your call is using.
Content-Type: application/sdp Content-Length: 237
v=0 o=CiscoSystemsCCM-SIP 23139 1 IN IP4 220.127.116.11 s=SIP Call c=IN IP4 18.104.22.168 t=0 0 m=audio 21192 RTP/AVP 18 101 a=rtpmap:18 G729/8000 a=ptime:20------->This attribute tells you what packetization your call is using (here its 20ms)
Please rate useful posts
"For the love of God is broader than the measure of man's mind And the heart of the Eternal is most wonderfully kind"
Please rate all useful posts
"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...