Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCM 8.6

I see that the VMWare .ova templates for creating CUCM (CallManager) images do not include a USB controller.

I tried adding the basic EHCI+UHCI controller in order to mount a  CUCM answer file (platformConfig.xml) from a USB key, however after  adding this USB controller I get an error that "This hardware  configuration is not supported" when trying to boot from a CUCM 8.6(2)  installation DVD.

The installation proceeds fine if I do not add the USB controller to my virtual machine.

Is there no way to use an answer file when building a CUCM 8.6 VMWare appliance?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

CUCM 8.6

Yes, but it's not via USB

utils import config

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/cli_ref/8_6_1/cli_ref_861.html#wp279072

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

CUCM 8.6

Yes, but it's not via USB

utils import config

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/cli_ref/8_6_1/cli_ref_861.html#wp279072

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

CUCM 8.6

That would be correct. We don't support any USB functionality on CUCM running on a VM.

505
Views
0
Helpful
2
Replies
CreatePlease to create content