Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Hey All,

I have read in the Cisco SRND for UC that you Microsoft Windows 2008 R2 64 bit Active Directory servers are not supported by Cisco for LDAP users. Can anyone confirm that this still works with CUCM 8.x? It not being supported is one thing, but it not working would completely suck.

Thanks

Marc

5 REPLIES
Bronze

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

We're running CUCM 8.6 against AD 2008 x64 without issue.

New Member

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Hi, Paul.

Thanks for you confirmation. Great news. We have a CUCM 8.6.2.20000-2 Unrestricted and planning to upgrade MS AD 2008 64 bit.

Do you use LDAP Authentication or LDAP syncronization on your CUCM and AD?

New Member

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Here is an important link to verify the supported LDAP version for specific CUCM version:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html#wp1097641

New Member

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

Hi, there, in the latest released SRND 9, the compatible Table in 8.x is no longer exist. I have the same question, our environment is 2008 r2 64 bit, is it supported by CUCM 8.x and 9.x? thanks Yvonne

New Member

CUCM 8.x and LDAP Integration with MS AD 2008 R2 64bit

The Intergration should work as its listed in the link below for 9.x

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_system-guide_chapter_010011.html#CUCM_TK_C4E65231_00

Its just that its not Cisco tested.

2134
Views
0
Helpful
5
Replies
CreatePlease to create content