Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM 9.1.2SU1 assign +E.164 numbers to meetme patterns

Hi,

 

We're trying to migrate all our DN's from E.164 to +E.164 on our CUCM 9.1.2SU1.

It seems that for the meetme patterns I cannot do this as it's saying I cannot use the +

Any help?

 

Thanks,

 

Jeroen

  • IP Telephony
2 ACCEPTED SOLUTIONS

Accepted Solutions

Hello Jeroen, Tip Meet-Me

Hello Jeroen,

 


Tip
 

Meet-Me patterns, Call Park (and related call park features; for example, Directed Call Park) patterns, and Call Pickup patterns do not support the international escape character, +, so you cannot enter \+ in the pattern fields that are configured for these features.


 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmsys/CUCM_BK_C5565591_00_cucm-system-guide-91/CUCM_BK_C5565591_00_cucm-system-guide-91_chapter_010000.html#CUCM_RF_UAD8BE59_00

 

>> so you may need to configure the translation pattern for the meet-me number range to strip the + before hitting the numbers

 

//Suresh

Please rate all the help posts.

//Suresh Please rate all the useful posts.
Hall of Fame Super Silver

I believe this is the case,

I believe this is the case, so you will need to define those without + sign.  There may be others, for example CTI ports, contact center agent IDs, etc. SRND describes it and states to use translations.

Chris

3 REPLIES

Hello Jeroen, Tip Meet-Me

Hello Jeroen,

 


Tip
 

Meet-Me patterns, Call Park (and related call park features; for example, Directed Call Park) patterns, and Call Pickup patterns do not support the international escape character, +, so you cannot enter \+ in the pattern fields that are configured for these features.


 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmsys/CUCM_BK_C5565591_00_cucm-system-guide-91/CUCM_BK_C5565591_00_cucm-system-guide-91_chapter_010000.html#CUCM_RF_UAD8BE59_00

 

>> so you may need to configure the translation pattern for the meet-me number range to strip the + before hitting the numbers

 

//Suresh

Please rate all the help posts.

//Suresh Please rate all the useful posts.
New Member

Hi Guys, OK, thanks for your

Hi Guys,

 

OK, thanks for your help. Indeed it seems + or \+ is not supported.

I have done it with a translation pattern now so that is OK.

 

Thanks,

 

Jeroen

Hall of Fame Super Silver

I believe this is the case,

I believe this is the case, so you will need to define those without + sign.  There may be others, for example CTI ports, contact center agent IDs, etc. SRND describes it and states to use translations.

Chris

87
Views
0
Helpful
3
Replies
This widget could not be displayed.