06-05-2014 05:41 AM - edited 03-16-2019 11:00 PM
Dear
The database replication for only 1 subscriber is not working for another 2 subscribers is perfect the i did the reset and stop for Database but no effect.
according to the link below but no susccess.
Cluster Detailed View from CUCMPUB01DC (4 Servers):
PING CDR Server REPL. DBver& REPL. REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) RPC? (ID) & STATUS QUEUE TABLES LOOP? (RTMT) & details
----------- ------------ ------ ---- -------------- ----- ------- ----- -----------------
CUCMPUB01DC 10.X.X.X 0.027 Yes (2) Connected 0 match Yes (2) PUB Setup Completed
CUCMSUB01DC 10.X.X.X 0.499 Yes (?) Off-Line N/A 0 N/A (4) Setup Completed
thanks
Solved! Go to Solution.
06-06-2014 07:09 AM
Hi Samuel,
Have u added these two subscribers in Publisher ?please let us know what is 10.20.15.15 in attached snapshot.
regds,
aman
06-06-2014 07:55 AM
thanks for the reply aman,
i have just put the fake ip's so pls don't consider.only consider the error " unable to connect node"
Have u added these two subscribers in Publisher ?please let us know what is 10.20.15.15 in attached snapshot
those were added from start and the attached error is when accessing the subscriber 2 and subscriber 3, from the serviceability page from the publisher
I have rebooted the whole cluster and Now the status is as below
PING CDR Server REPL. DBver& REPL. REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) RPC? (ID) & STATUS QUEUE TABLES LOOP? (RTMT) & details
----------- ------------ ------ ---- -------------- ----- ------- ----- -----------------
CUCMPUB01DC 10.X.X.X 0.050 Yes (2) Connected 0 match Yes (2) PUB setup completed
CUCMSUB01DC 10.X.X.X 0.392 Yes (?) Off-Line N/A match Yes (4) N/A
cucmsub02dc 10.X.X.X 3.657 Yes (7) Connected 0 match N/A (0) Setup in progress
cucmsub03dc 10.X.X.X 3.776 Yes (8) Connected 0 match N/A (0) Setup in progress
06-08-2014 12:42 PM
Dears
The problem is solved, there was port (8500) blocked on network side for subscriber to other subscribers but it is strange that between the subscriber 8500 was not reachable and the node was seen off-line, i was thinking that the replication is done by publisher to subscriber but by this issue I came to know that between the subscriber also we need these opens.
1 question,
how would I verify the port is open from CUCM node to the other CUCM node.
as such from windows we do telnet 10.X.X.X 8500
Thanks
06-05-2014 07:14 AM
Thanks Aman [+5]
Yosh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide