Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

CUCM 9.X integration with ARC 6.X

We are planning to install ARC in our environment. Just wondering if anyone has a good configuration guide to use as a reference on how to integrate it with CUCM 9.X

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

HiDocuments are available

Hi

Documents are available here: http://www.arcftp.com/ProductRelease/Cisco/Release_6.0/V6.0.0_Arc_Premium_Edition/

Bear in mind it's quite complicated, the interface is tricky even if you know it well, and technically an ARC system should only be installed by an accredited engineer to maintain support etc.

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
5 REPLIES
Community Member

Here you go, it is for

Here you go, it is for attendant console 9.x; same principal should apply

Super Bronze

HiDocuments are available

Hi

Documents are available here: http://www.arcftp.com/ProductRelease/Cisco/Release_6.0/V6.0.0_Arc_Premium_Edition/

Bear in mind it's quite complicated, the interface is tricky even if you know it well, and technically an ARC system should only be installed by an accredited engineer to maintain support etc.

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Community Member

Thanks guys:)

Thanks guys:)

Super Bronze

No problem!Please remember to

No problem!

Please remember to rate helpful responses and mark threads as 'answered' when appropriate to highlight useful content..

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Community Member

Just rated then. Is it

Just rated then.

 

Is it possible to have your input on my below post?

https://supportforums.cisco.com/discussion/12277951/cucm-integration-legacy-pbx

 

thanks

59
Views
0
Helpful
5
Replies
CreatePlease to create content