Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM add gateway query

Hi,

I want to add a Cisco 888 gateway using MGCP in CUCM version 6.1.2.1124-1, this type of Gateway is not there to add, is there an update I can apply to CUCM to be make this Gateway available to do this?

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
Silver

Re: CUCM add gateway query

Norm,

Found this in a SRST document - implies support starts at 6.13

SRST 880 is natively supported by CUCM 6.13 and 7.1

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs43spc.html

HTH,

Art

Re: CUCM add gateway query

According to the following link, you need a minimum of 6.1(3), 7.0(2) or 7.1(3).

http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html

Hope this helps.

Brandon

4 REPLIES
Silver

Re: CUCM add gateway query

Norm,

Found this in a SRST document - implies support starts at 6.13

SRST 880 is natively supported by CUCM 6.13 and 7.1

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs43spc.html

HTH,

Art

New Member

Re: CUCM add gateway query

Cheers for that, looks like I will need to upgrade to 6.1.3.

Your help is much appreciated!

N.

Re: CUCM add gateway query

According to the following link, you need a minimum of 6.1(3), 7.0(2) or 7.1(3).

http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html

Hope this helps.

Brandon

New Member

Re: CUCM add gateway query

Thanks for your help here, looks like I will need to upgrade to 6.1.3.

Much appreciated!

N.

218
Views
0
Helpful
4
Replies
CreatePlease login to create content