Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM alerting while call is busy

Hi all.

Yesterday i faced with problem:

Ringing tone is generated to IpPhone1(from CUCM i guess) while call declined by customer.

Design

IpPhone---CUCM---SIPtrunk---Redundant Voice gateways---E1 PRI --- PSTN---Customer Phone

On the voice gateway:

debug isdn q931

i see message  "Busy received" and channel is cleaned.

But even after channel clearing IPphone keep receiving ringing tone for about 30 sec.

If call is answered - no problems. Normal clearing and call termination.

If no channels available or all ports are shutdown no rerouting via redundant gateway occur.

I guess Voice gateway do not send some important message or waits for some event but i cant firure up for what. Maybe i missed something important in config.

Configuration of Voice GW is appended.

Any help is greatly appreciated.

Everyone's tags (5)
2 ACCEPTED SOLUTIONS

Accepted Solutions

CUCM alerting while call is busy

Hi oleg.

add voice call disc-pi-off to your config.

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
VIP Super Bronze

Re: CUCM alerting while call is busy

From the logs,

When the Telco sends a disconnect, it sends a PI (progress indicator-perhaps plays a prompt rather that the usual disconnect), hence as far as the gateway is concerend the call is still in progress and therefore does not send a disconnect to cucm

Oct 25 09:00:00.042: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8  callref = 0x80A1

        Cause i = 0x8491 - User busy

        Progress Ind i = 0x8288 - In-band info or appropriate now available

*Oct 25 09:00:00.042: ISDN Se0/0/0:15 Q931: call_disc: PI received in disconnect; Postpone sending RELEASE for callid 0x8041

Detailed explanation of this is below:

The debug Isdn q931 command output shows this message when the Public Switched Telephone Network (PSTN) user hangs up the call:

ISDN Se1/0:15 Q931: call_disc: PI received in disconnect; Postpone sending RELEASE for callid 0x8012

Resolution

Issue the voice call disc-pi-off command on the gateway so the gateway treats a disconnect message with a Progress Indicator (PI), as it treats a standard disconnect without a PI, (issue the voice call disc-pi-off command in global configuration mode).

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
9 REPLIES
VIP Super Bronze

CUCM alerting while call is busy

Oleg,

This is not the first time I have see this. It seem to be common to sip trunks...

Can you do a test call and send the ff:

debug isdn q931

debug ccsip messages

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Re: CUCM alerting while call is busy

Appended this debugs.

Where xxxxxxx - calling number, yyyyyyy - called number.

Call from Ipphone to pstn user.

I see from ccsip log - voice GW DO NOT SEND any message after user busy reseived. Only SESSION PROGRESS instead of BYE or CANCEL.

VIP Super Bronze

CUCM alerting while call is busy

Can you please enable the debigs together. I need to correlate isdn logs to sip logs...

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Re: CUCM alerting while call is busy

Here are concatenated debug.

CUCM alerting while call is busy

Hi oleg.

add voice call disc-pi-off to your config.

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
VIP Super Bronze

Re: CUCM alerting while call is busy

From the logs,

When the Telco sends a disconnect, it sends a PI (progress indicator-perhaps plays a prompt rather that the usual disconnect), hence as far as the gateway is concerend the call is still in progress and therefore does not send a disconnect to cucm

Oct 25 09:00:00.042: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8  callref = 0x80A1

        Cause i = 0x8491 - User busy

        Progress Ind i = 0x8288 - In-band info or appropriate now available

*Oct 25 09:00:00.042: ISDN Se0/0/0:15 Q931: call_disc: PI received in disconnect; Postpone sending RELEASE for callid 0x8041

Detailed explanation of this is below:

The debug Isdn q931 command output shows this message when the Public Switched Telephone Network (PSTN) user hangs up the call:

ISDN Se1/0:15 Q931: call_disc: PI received in disconnect; Postpone sending RELEASE for callid 0x8012

Resolution

Issue the voice call disc-pi-off command on the gateway so the gateway treats a disconnect message with a Progress Indicator (PI), as it treats a standard disconnect without a PI, (issue the voice call disc-pi-off command in global configuration mode).

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
VIP Super Bronze

CUCM alerting while call is busy

+5 Carlo. Keep the good work going.

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

CUCM alerting while call is busy

..and +5 to Aok for always giving excellent and detailed answers.

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
New Member

Re: CUCM alerting while call is busy

TY guys. Now busy calls are threated correctly.

806
Views
25
Helpful
9
Replies