Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCM and branches over MPLS

hello experts

the two DN. 2001 - 2001 is registered in same call manager with different location sites thru MPLS WAN

how can assign an area code before DN. 41-2001  for 1st site  - DN. 51-2001  for the 2nd location to reach each extension

let to summarize the current situation:

Site 1- HQ

CUCM

GW between branches for MPLS provider

DN.   2001  to 9000

site 2 - Branch 1

Voice GW with SRST for MPLS

DN.   2001  to 9000

site 2 - Branch 2

Voice GW with SRST for MPLS

DN.   2001  to 9000

any help ,

1 REPLY
Hall of Fame Super Silver

CUCM and branches over MPLS

You need to develop an enterprise dial plan that eliminates potential overlaps such as this one. Either use e164 dial plan or variable length dial plan (think site codes) or uniform dial plan with extension length longer than 4 digits, i.e. 6, where the DN is last 6 digits of the DID or any other prefix normalized at ingress.

HTH,

Chris

228
Views
0
Helpful
1
Replies
CreatePlease to create content