Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM BE 6.0.1 CCMUSER problem

Hi

Some of my users can login via CCMUSER web page but most cannot. They get an invalid userid or password response. I cant see any difference between the users that can and cannot login. Any ideas where I should start to look ?

Thanks

Pat

3 REPLIES
New Member

Re: CUCM BE 6.0.1 CCMUSER problem

Well this seems to be connected to an user password issue in that something weird is going on with passwords. For some users if you look at that user the password field and confirmation field for the password show different numbers of stars and to save any changes for the user you have to enter the password again. This type of user cannot login until I manually change the password (was entered using BAT).

New Member

Re: CUCM BE 6.0.1 CCMUSER problem

Hi Pat

I had similar issues with users that could log in on ccmuser but not change their password because it stated that the existing password was wrong. The solution was to make a Bulk Reset of all the users passwords and PINs (both must be reset when using Bulk). After the reset everything worked fine. The issue must be with passwords that were entered with BAT.

Regards

Stefan

Hall of Fame Super Red

Re: CUCM BE 6.0.1 CCMUSER problem

Hi Pat/Stefan,

I think you may be hitting this bug;

CSCsi65567 Bug Details

User Insertion using BAT

Problem: While inserting users through BAT, A field related to password settings "users must change at next login" is selected by default whereas CCM doesnt select this field when we add a user manually. So, we need to manually change it to "users cant change" after adding users through BAT. Changing the credential policy default also doesnt help.

Set up:Users inserted through BAT

Work around: None

1st Found-In

6.0(1.1000.2)

Fixed-In

6.0(0.9901.241)

6.1(1.1000.11)

Hope this helps!

Rob

155
Views
0
Helpful
3
Replies