Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM BE 6.0.1 default device profile

Hi

I am trying to configure extension mobility and following the manual. When I try and create a default device profile I get the drop down menu and can select say 7960 and then get a screen where I can set the phone button template etc. As soon as I try and save this screen I get the following error:

Add failed. [493] TypeDbErrors.INVALID_PROFILE_NAME

4 REPLIES
Bronze

Re: CUCM BE 6.0.1 default device profile

The workaround is to supply a name which the db likes, according to the following conventions

1. The length of the name should be 15 characters.

2. The name should have characters between A-F. Only capital letters.

3. It can have numbers between 0-9. This is optional. An example name would be: ABC123DEF321ADC.

Anonymous
N/A

Re: CUCM BE 6.0.1 default device profile

I'm having the same issue and the above workaround does not help. Did you find out the issue for this?

New Member

Re: CUCM BE 6.0.1 default device profile

Hi

Sorry the problem just went away. It was a really busy week and when I went back to the issue and tried it again it just worked and I don't know what I did differently.

Pat

Anonymous
N/A

Re: CUCM BE 6.0.1 default device profile

OK. thanks for the response. This problem has not prevented setting up Extn Mobility or stopped it from working so can live with it for now.

regards

David

244
Views
0
Helpful
4
Replies