Cucm bulk administration

[sharon carasenti]

Hi

I have a cucm ver 8.6

There is a request to create in bulk a devices in the format :

Mac address with remote destination an remote destination profile

I triad number attempts to do so can anyone have idea ?

Thanks


Sent from Cisco Technical Support Android App

[Jonathan Schulenberg]

You'll need to execute a few separate jobs as there is no single job that will do it all.

• Insert phones
• Update users (e.g. associate physical phone, set primary extension, enable mobility, set primary device)
  Alternatively, you can use insert phone/user if the cluster is not integrated with LDAP
• Insert Remote Destionation Profile
• Insert Remote Destionation

Please remember to rate helpful responses and identify helpful or correct answers.

[sharon carasenti]

Hi

Thanks on your info .

It's alote to configure .the correct flow is :

Only Device profile / remote dest / remote dest profile / device / users id

I can't do that on 2-3 bulk ?

Sent from Cisco Technical Support Android App

[sharon carasenti]

Hi

Thanks on your info .

It's alote to configure .the correct flow is :

Only Device profile / remote dest / remote dest profile / device / users id

I can't do that on 2-3 bulk ?

Sent from Cisco Technical Support Android App