We are using CUCM 8.5 BE. Sometimes it is reported that the call automatically disconnects after random period of time. Before the call disconnects, an announcement is played "Your call your call will be disconnected after 60 sec". This announcement is repeated after every 15 seconds and the call finally disconnects after 60 sec. The problem mainly occurs on calls made to UAE.
For one call, CDR CMR dump shows origCause_value = 16, destCause_value = 0 while for other origCause_value = 0, destCause_value = 16
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...