I just need to talk this logic out and see if it is sound. I am mid-rebuild on my lab and need to solve a problem...thanks in advance!
CSS-A includes Partition_A
CSS-B includes Partition_A & Partition_B
Gateway is in Partition_A with CSS-A
Receptionist is in Partition_A with CSS-B
User is in Partition_B with CSS-B
They would like the gateway to only be able to dial the Receptionist. And then for the receptionist to be able to transfer calls from the gateway, as needed, to the Users. The users need to be able to dial out through the gateway and reach the receptionist.
I just want to verify that the transferred calls by the receptionist will still connect since the Users are in a partition that is not accessible by the Gateway's CSS. I know this is basic stuff but for some reason I am just drawing a blank right now! Frustrating....
I know this is convoluted but they want to make sure there is an extra level of separation from the gateway to the users to prevent some legacy DID behavior (LONG STORY).
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.