Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

zl
New Member

CUCM Cluster Not sync

The Cluster can ping hostname each other,but when I use RTMT,the publisher "Replicattion Status" is 4,subscriber is 0.CUCM version is 7.0.1.11000-3.

I reference this page,and it dose not useful. http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00809643e8.shtml

2 REPLIES
zl
New Member

Re: CUCM Cluster Not sync

For every server, shows if you can read from the local and publisher databases.

Local and publisher databases accessible.

View Details

Server Publisher DB Reachable Local DB Reachable

192.168.97.10 true true

192.168.97.11 true true

Unified CM Database Status Shows if replication is good or bad.

RTMT Counter Information

All servers do not have a replication count of 412.

Not all servers have a good replication status. See the details.

View Details

Server Number of Replicates Created Replicate_State

192.168.97.10 412 4 - setup failed

192.168.97.11 0 0 - initializing

Server Host Information

192.168.97.10

#This file was generated by the /etc/hosts cluster manager.

#It is automatically updated as nodes are added, changed, removed from the cluster.

127.0.0.1 localhost

192.168.97.10 ccm-pub.uccisco.com ccm-pub

192.168.97.13 CUPS.uccisco.com CUPS

192.168.97.11 ccm-sub.uccisco.com ccm-sub

192.168.97.11

#This file was generated by the /etc/hosts cluster manager.

#It is automatically updated as nodes are added, changed, removed from the cluster.

127.0.0.1 localhost

192.168.97.11 ccm-sub.uccisco.com ccm-sub

192.168.97.10 ccm-pub.uccisco.com ccm-pub

192.168.97.13 CUPS.uccisco.com CUPS

Re: CUCM Cluster Not sync

Check your NTP time is insync on the publisher.

Sometimes simply rebooting the publisher and or the subscriber will get it back. If it's a new setup, and you have wasted more than 4 hours trying to fix the subscriber, reload it. It only takes 1-2 hours to reload it and set it backup.

997
Views
0
Helpful
2
Replies