Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM Dial Issues

Hi,

We have CUCM 8.6.1 and we have strange problem. On some phones and some Directory Numbers, when we push New Call Button on phone and Dial Directory Number, phone doesn't ring about 7-10 seconds and then rings. But if we dial another directory number, it works without problems.

Do you know what may be the problem?

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

CUCM Dial Issues

7-10 seconds seems a timeout, you must have some overlapping patterns, with some extensions.

For example you might have extensions 2300, 2100 and a route pattern 21XXXXXXXX

2300 will dial correct, but 2100 will also match the route pattern, so waits for time out.

JH

4 REPLIES
Silver

CUCM Dial Issues

7-10 seconds seems a timeout, you must have some overlapping patterns, with some extensions.

For example you might have extensions 2300, 2100 and a route pattern 21XXXXXXXX

2300 will dial correct, but 2100 will also match the route pattern, so waits for time out.

JH

New Member

CUCM Dial Issues

We don't have any overlapping patterns. For example one extension is 446. some phones dial without problems, but others not.

Silver

CUCM Dial Issues

Then you have to enable logging, and check what is the difference between one call and the other.

Still 7-10 seconds seems a time out, do the phone have the same CSS?

Or just give (temporary) some phone the same CSS and see if there is difference.

JH

New Member

Re: CUCM Dial Issues

Here is call log. I dialed from 730 to 446, which had problem. Then I dialed 446 to 733 and it worked normally:

2013/09/04 17:48:19.404|CC|SETUP|37536864|37536865|730|446|446

2013/09/04 17:48:19.406|CC|OFFERED|37536864|37536865|730|446|446|SEPAC162D02E19C|SEP2C542D064AC2

2013/09/04 17:48:20.739|CC|RELEASE|37536864|37536865|16

2013/09/04 17:48:30.916|CC|SETUP|37536866|37536867|446|733|733

2013/09/04 17:48:30.918|CC|OFFERED|37536866|37536867|446|733|733|SEP2C542D064AC2|SEP1C17D337C2E3

2013/09/04 17:48:32.185|CC|RELEASE|37536866|37536867|16

I'm new in CUCM world so I don't now much

They have same CSS...

I solved the problem. Reason was overlapping pattens. I had Call Park pattern 44XX.

Thanks for help.

150
Views
0
Helpful
4
Replies