Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM + Exchange 2007 and SRV record

In the lab I have a CUCM 7.x system successfully integrated with E2K7SP1.

The SIP Trunk is using TCP (not TLS) and works if I code the IP or the FQDN of the E2K7 UM node.

If I create a SRV record in MS DNS with a priority/weight of 0/0, a port of 5060, and point it at the same A record FQDN as used above I cannot get CUCM to successfully use the SRV.

A nslookup from another client using the same DNS server returns the right results.

e.g.

"A" record exchange.lab.local = 192.168.2.100

SRV record _sipe2k7._tcp.lab.local is given a weight of 0, a priority of 0, a port of 5060, and is associated to the "A" record of exchange.lab.local.

On the SIP trunk that is working using an IP of 192.168.2.100 or a DNS name of exchange.lab.local, I enter the SRV record of _sipe2k7._tcp.lab.local, check the checkbox for SRV, watch the port automatically change to 0, save, apply, and reset the trunk, and the trunk is no longer usable.

Ideas?

227
Views
0
Helpful
0
Replies