Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM - extension mobility question

we are using EM, for users that goes to different places, the model we are using is a centralized, with different CCS and partitions for each office, for having local calls using its respective Local GW. The question is, when the user loggins in, the user should get the local CCS for make local calls without care where the user is, how could i do that?

example:

the user could loggin in anywhere using EM, and the behavior expected is:

main office : the user must have the main CCS for having Local calls using the Main office´s GW

office A: the user must have the office A CCS for having local calls using the office A´s GW

office B: the user must have the office B CCS for having local calls using the office B´s Gw

how coud i do that?

thanks

2 REPLIES
Cisco Employee

Re: CUCM - extension mobility question

Use device mobility

Device Mobility

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk
HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CUCM - extension mobility question

Or use block partitions, css and route patterns.

so the css on the device is used for the call path and the line css is used for rights.

there are some good cisco docs available for this.

161
Views
0
Helpful
2
Replies