Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM Gpickup

Hi ALL,

In CUCM 7.0, the user must press Gpickup and dial pickup group number like 555. is there any way for user only press Gpickup button and pickup incoming call from receptionist phone? we are only using one group pickup so it makes no sense to dial pickup group number.

any suggestion would be very appreciated.

thanks

Alex

1 REPLY
Cisco Employee

Re: CUCM Gpickup

Hi!

If you have only one group and users will pickup calls within that group only use the "Pickup" Softkey.

Please refer to:

"The Call Pickup feature allows users to pick up incoming calls within their own group. Cisco Unified Communications Manager automatically dials the appropriate call pickup group number when the user activates this feature from a Cisco Unified IP Phone. Use the softkey, PickUp, for this type of call pickup."

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fscpickg.html#wp1091430

HTH,

If it does, please rate :)

Regards,

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
873
Views
0
Helpful
1
Replies