Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM H225 stack process error similar to CSCtc48579

Hi Community Members,

We're facing an issue with incoming ISDN PRI calls from the PSTN. It only happens when calling from specific numbers.

isdn switch-type primary-dms100

In the CUCM trace I see the following error:

17:33:51.114 |ProcessH225Message::decodeUuie ** ERROR  rc=4

D0081S: End of input reached before message was fully decoded; check PDU #5 'H323-UserInformation'.

This looks like CSCtc48579, but this is the platform:

c2900-universalk9-mz.SPA.151-4.M2

Active Master Version: 8.6.1.20000-1

Already tested with the command "signaling forward unconditional" but no luck. Attached the complete UUIE error.

Thanks in advance.

Carlo

2 REPLIES
New Member

CUCM H225 stack process error similar to CSCtc48579

Hi

I just opened a TAC case for this.

Regards

Carlo

New Member

CUCM H225 stack process error similar to CSCtc48579

By the way, the problem was in the Voice GW I was using H.323 SS, changed back to FS (default) and that fixed the issue.

Regards

434
Views
0
Helpful
2
Replies