ā11-22-2011 08:04 AM - edited ā03-16-2019 08:10 AM
Hi Community Members,
We're facing an issue with incoming ISDN PRI calls from the PSTN. It only happens when calling from specific numbers.
isdn switch-type primary-dms100
In the CUCM trace I see the following error:
17:33:51.114 |ProcessH225Message::decodeUuie ** ERROR rc=4
D0081S: End of input reached before message was fully decoded; check PDU #5 'H323-UserInformation'.
This looks like CSCtc48579, but this is the platform:
c2900-universalk9-mz.SPA.151-4.M2
Active Master Version: 8.6.1.20000-1
Already tested with the command "signaling forward unconditional" but no luck. Attached the complete UUIE error.
Thanks in advance.
Carlo
ā11-23-2011 06:51 AM
Hi
I just opened a TAC case for this.
Regards
Carlo
ā11-24-2011 08:02 AM
By the way, the problem was in the Voice GW I was using H.323 SS, changed back to FS (default) and that fixed the issue.
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: