Need your help. I have 2 pbx cucm 8.6 and avaya ip office 406 connected via h.323. cucm numbers 2xx, avaya 3xx. I need create hunt group with phones on both pbx, they have to ring simultaneously. Before cucm we used ccme and creat that hunt group was easy, just writing rigth numbers in. In cucm i can't add in hunt group numbers not from cucm, like on ip office. May be someone know solution? I can't move all phones in this group on one pbx. Thanks for any ideas and sorry for my english.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...