Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CUCM IN HA(Cluster mode)

Hi all

i need your opinion regarding the below

Usually with CUCM in cluster mode we use as primary the subscriber to register their the ipphones , publisher is a primary for the tftp and for the other jobs

The above senario is when the cluster is over the lan

Now what is the best senario if the cluster is over the wan

We can use the above senario or ??

Regards

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

CUCM IN HA(Cluster mode)

Hi

Sure - you use the same roles for the servers in the cluster so would use a subscriber for call processing.

If you mean splitting the cluster over a WAN, you need to be aware of the minimum latency and bandwidth requirements for traffic between the CUCM servers. This is discussed in the SRND.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
Super Bronze

CUCM IN HA(Cluster mode)

Hi

Sure - you use the same roles for the servers in the cluster so would use a subscriber for call processing.

If you mean splitting the cluster over a WAN, you need to be aware of the minimum latency and bandwidth requirements for traffic between the CUCM servers. This is discussed in the SRND.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

CUCM IN HA(Cluster mode)

tHANK YOU

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
247
Views
0
Helpful
2
Replies
CreatePlease login to create content