Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM Mobility problem

Hi, all!

I have the following problem.

Have the next scheme CUCM6.1 --> IP-IPGW (5350) -->H323 Provider.

Have the adjusted mobility feature. All had worked fine till last time. But recently we have replaced the platform and ios of IP-IPGW (from 2651XM 12.3(6) to 5350XM 12.4(24)T).

And after that  we have the problem: when the call go to number, desktop IP-Phone and cell phone ringing simultaneously, but when i pick up the cell phone hear only silence, whereas IP-Phone continue ring.

In that the problem can be?

Thanks

Grom

2 REPLIES
Bronze

Re: CUCM Mobility problem

Can you call the cell phone from an internal cucm phone? can you add it to a conference call?

I would lean toward codec or mtp issues if needed to assume the source of this issue. A more accurate response can be made if you upload the config files for both gateways.

New Member

Re: CUCM Mobility problem

I have solved the problem.

I used command h225 connect-passthru on the IP-IPGW and now all works good.

195
Views
0
Helpful
2
Replies