Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM - no DN in SRST mode when Subscriber shutdown

-CUCM 6.1.2.1000-13

-2811 12.4.15.T6, advanced service provider

CUCM group has Sub, Pub, SRST. Sub is shutdown, phones are registered to Pub as active and SRST as standby. when the remote site switching to SRST mode, no DN on the IP Phone.

Back to normal mode and removed Sub from CUCM group. when switching to SRST mode, now I can get DN on the IP Phone.

Q) why SRST site IP phone cannot get DN in SRST mode when Sub shutdown while the Sub part of CUCM group? Bug?

Thanks in advance,

4 REPLIES
Silver

Re: CUCM - no DN in SRST mode when Subscriber shutdown

I think you might have to reduce the number of classes of service in SRST mode to accommodate all the DNs without exceeding these limitations.

Cisco Employee

Re: CUCM - no DN in SRST mode when Subscriber shutdown

can you post your SRST config?

the sole description does not provide enough details to tell why it's not working

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CUCM - no DN in SRST mode when Subscriber shutdown

Does anyone know why this is happening..I have the same issue, sub is down, no dn's on the phones when the phones fallback to SRST, can anyone tell me how to resolve this issue? thanks

New Member

Re: CUCM - no DN in SRST mode when Subscriber shutdown

The UCM ver is 6.1 the IOS ver is c2800nm-ipvoice_ivs-mz.124-24.T.bin

199
Views
1
Helpful
4
Replies