We recently procured the 819 platform with 15.1.4 IOS but now we can't get the CCME to work and actually there is little we can find on the Cisco.com portal that clearly states that the CCME is not supported so can anyone provide some clarity on this? CCME on 819 possible or not?
FYI: the SW release 15.1.4 does state that the IOS includes CCME version 8.6 but on the 819 there is no sign of a Voice file or command support.
I'm no voice tech guy but if by "CME" you mean load the software into the 819 router, then the answer is NO. The reason is because the 819 does not have enough flash memory capacity to load the software and associated phone loads.
If by "CME" you mean hardware, the answer is still no because the ISM/SM card cannot physically "fit" into the tiny frame.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...