CUCM one side voice

[mukeshrulaniya]

Hello All,

                  I am using Cisco call manager 6.0 and i am using public IP on it.I configure it well now my phone are registered from every network but i have one problem that my voice is going but i can't hear the another side voice. On my router or switch m not using any voice vlan or any rule so please advise me how to solve this problem ?

thanks

Mukesh

[D_Lebedev]

Temporary give 192.168.1.119 to some PC/Laptop and try ping\trace 117.199.123.15

You will see where packets stop.

I'm sure it is routing based problem.

Everything is ok with your configuration i think.

I faced with same problem in our first branch installation.

If you have no routes to all Phone's subnets.You'll not be able to make 2 way calls.

[mukeshrulaniya]

Hello D,

                           Yes you are right i have some packet drop when i do to tracert.but my public ip is advertised good and i can ping and trace it from any where and my "sh ip route" is also good.

So want i can do for it please advise me .

Thanks

Regards

Mukesh

[michael.wilson]

What is doing the topology hiding? Sounds as if signaling is fine, but your rtp traffic is going else where.

Sent from Cisco Technical Support iPad App

[D_Lebedev]

Login to your problem Phone by http and paste here last of console logs please

It will be named like: "/FS/cache/logXX"

[arnela.jokhoo]

Seems like he has a nat issue?? public ip into private you have any firewalls between networks?