Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

CUCM S/W levels - what do they mean

I have a CUCM which is 6.0.1.2000-3 and wish to upgrade to a later vrison on the upgrade matric I see 6.0.(1a) or 6.0.(1b)or even just 6.0.(1) but not an exact match for mine - I wish to upgrade either to 6.1.2 or 6.1.3 can someone tell me what 6.0.1.2000-3 is - do I need to go 6.1(1) first and then 6.1(2) or straight to 6.1(2)

many thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: CUCM S/W levels - what do they mean

6.0.1.2000-4 is 6.0(1a)

Table 4 Supported Cisco Unified Communications Manager Upgrades for Release 6.x and Release 7.x

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40122

you can go to 6.1(2) directly but no to 6.1(3), all info on above link

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Cisco Employee

Re: CUCM S/W levels - what do they mean

feature license on 6.X train (if you already have it is no longer required) but you'll need one for any major upgrades

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
5 REPLIES
Cisco Employee

Re: CUCM S/W levels - what do they mean

6.0.1.2000-4 is 6.0(1a)

Table 4 Supported Cisco Unified Communications Manager Upgrades for Release 6.x and Release 7.x

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40122

you can go to 6.1(2) directly but no to 6.1(3), all info on above link

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Silver

Re: CUCM S/W levels - what do they mean

Java

Thanks another question if you are already on 6.x can you just upgrade without software feature license? On the readme file it mentions that you need a S/W feture license for the handsets to register but then in the admin guide which the readme file points you to, only mentions the license if you are not on an existing 6.x S/W

Cisco Employee

Re: CUCM S/W levels - what do they mean

feature license on 6.X train (if you already have it is no longer required) but you'll need one for any major upgrades

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Silver

Re: CUCM S/W levels - what do they mean

Is there any major issue with 6.1.2, 6.1.3 I`ve seen one regardign 6.1.2 and EM and adding additional DN`s on the profile

Cisco Employee

Re: CUCM S/W levels - what do they mean

i can't recall any specifics of issues with 6.1(2) but we always recommend going to the latest available release

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
144
Views
0
Helpful
5
Replies
CreatePlease to create content