Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

CUCM SIP Route Pattern Discussion

 
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

To any system to which you

To any system to which you can route SIP calls, audio and/or video, like a VCS.

Or if you have another PBX which register endpoints with URIs and accepts SIP trunks, you could also use it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
14 REPLIES
Cisco Employee

Help -> For this pageIPv4

Help -> For this page

IPv4 Pattern

(Required) Enter the domain, sub-domain, IPv4 address, or IP subnetwork address.

For Domain Routing pattern usage, enter a domain name IPv4 Pattern field that can resolve to an IPv4 address. The domain name can contain the following characters: [, -, ., 0-9, A-Z, a-z, *, and ].

For IP Address Routing pattern usage, enter an IPv4 address the IPv4 Pattern field that follows the format X.X.X.X, where X represents a number between 0 and 255.

For the IP subnetwork address, in Classless Inter-Domain Routing (CIDR) notation, X.X.X.X/Y; where Y is the network prefix that denotes the number of bits in the address that will be the network address.

Tip   

If the SIP trunk supports IPv6 or both IPv4 and IPv6 (dual-stack mode), configure the IPv6 Pattern in addition to the IPv4 pattern.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Could you please highlight

Could you please highlight the answer?

 

I have read some Cisco documentation and CUCM help before posting my question, and i did not find a way to create a SIP route pattern that could match any IP address.

Cisco Employee

For IP Address Routing

For IP Address Routing pattern usage, enter an IPv4 address the IPv4 Pattern field that follows the format X.X.X.X, where X represents a number between 0 and 255.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Thank you and +5but I did not

Thank you and +5

but I did not find the solution, to make my question more clear, I have a customer they used CUCM only for video conference endpoints, no any IP phone. They want to call by IP address so I want to create only one route pattern to accept all IP addresses, so how I should create this route pattern. This route pattern should accept any real IP address

Cisco Employee

You cannot create one pattern

You cannot create one pattern for all IPs, the field only accepts from 0 to 255, meaning, it HAS to be a perfectly defined IP. If you could do that, if would mention what to use for wildcards, don't you think???

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

When I read in the

When I read in the documentation I said it is not possible to implement but I asked to see if there is any work around solution 

 

By the way, where I can use SIP route pattern other than video conference

Cisco Employee

To any system to which you

To any system to which you can route SIP calls, audio and/or video, like a VCS.

Or if you have another PBX which register endpoints with URIs and accepts SIP trunks, you could also use it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Thanks

Thanks

Community Member

Jaime, does Cisco have plans

Jaime, does Cisco have plans to enable wildcards in this field? 

Cisco Employee

Roadmap questions have to be

Roadmap questions have to be addressed by your AM, or posted in partner communities, this cannot be discussed at CSC.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Gotcha.  Thanks.

Gotcha.  Thanks.

CUCM won't allow you to do a

CUCM won't allow you to do a summarized 0.0.0.0/0 Route Pattern.

But you can accomplish this in two SIP Route Patterns:

1.0.0.0/1 (this will cover 0.0.0.0 - 127.255.255.255)
and
128.0.0.0/1 (this will cover 128.0.0.0 - 255.255.255.255)


-Tony

Please remember to rate useful posts.

Community Member

This is what I call an answer

This is what I call an answer. Thank you man.

-- Filippo Zangheri Gencom S.r.l.
Community Member

Saved my bacon, thanks!

Saved my bacon, thanks!

2934
Views
70
Helpful
14
Replies
CreatePlease to create content