Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM SIP SRST

hi,i am configuring a SIP SRST on 3825 with CCM 6.1.3 ,and find it does not works.Could you check it for me! thanks!

Here is the configuration

voice class codec 100

codec preference 1 g711ulaw

codec preference 2 g711alaw

codec preference 3 g729br8

codec preference 4 g729r8

!

voice service voip

allow-connections sip to sip

redirect ip2ip

sip

registrar server expires max 600 min 60

redirect contact order best-match

!

voice register global

system message SIP SRST

max-dn 336

max-pool 10

!

voice register pool 1

id network 10.5.16.0 mask 255.255.240.0

preference 1

digit collect kpml

dtmf-relay rtp-nte cisco-rtp sip-notify

voice-class codec 100

no vad

!

voice register pool 2

id network 10.8.240.0 mask 255.255.248.0

preference 1

digit collect kpml

dtmf-relay rtp-nte cisco-rtp sip-notify

voice-class codec 100

no vad

!

sip-ua

retry invite 3

retry bye 3

retry cancel 3

timers trying 200

1 REPLY
Green

Re: CUCM SIP SRST

Config looks good

Verify SIP SRST reference for SIP Phones is properly configured in Device Pool,

show sip-ua status registrar

show voice register pool xx

show voice register dial-peers

show voice register statistics

to debug:

debug voice register errors

debug voice register events

debug ccsip message

The SIP SRST Administrator Guide on

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/sipsrst/configurat

ion/guide/spsrst0.html

debug voice register errors

debug voice register events

debug ccsip message

2724
Views
0
Helpful
1
Replies